跳到步骤＃8
由 Zebedee Hallman — 编辑
编辑已通过 由 Zebedee Hallman
- 之前
- 之后
- 不变
步骤行
| + | [title] Separate from Bezel |
|---|---|
| + | [* black] Separate the display from the bezel. |
| + | [* black] The display is glued to the bezel. Using your plastic tool, carefully go around the bezel to separate. |
| + | [* black] HP didn't use screws on these. Instead, they used plastic from the bezel and melted it to cover the holes. These plastic dots will need to shaved off. It will take a metal edge to do it. |
| + | [* black] Use caution while separating the screen from the bezel. The bezel is made from very thin plastic, and will crack easily if too much pressure is applied. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加