跳到步骤＃11
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| [* black] Use an opening pick to pry the contact pad off of the rear case. | |
| [* black] Remove the rear button assembly. | |
| - | [* icon_note] If the replacement piece does not include these picess, you may wish to transfer them as they are easy to remove and replace on the new part: |
| - | [* black] Adhesive around the camera |
| - | [* black] Gold mesh adhesive |
| - | [* black] Clear middle adhesive |
| - | [* black] Small adhesive near bottom corner |
| - | [* black] QR sticker and IMEI barcode label |