跳到步骤＃9
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| [* black] Slide an opening pick between the rear button membrane and the rear case. | |
| [* black] Slide the pick around the edge of the membrane to separate it from the rear case. | |
| - | [* icon_note] This might take some force, as the adhesive holding the membrane is tenacious. Pry slowly, to avoid puncturing or stretching the membrane. |
| + | [* icon_note] This might take some force, as the adhesive holding the membrane to the case is tenacious. Pry slowly, to avoid puncturing or stretching the membrane. |