跳到步骤＃8
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| [* black] Slide the blade of a halberd spudger into the opening on the edge of the rear button bracket. | |
| [* icon_caution] Careful not to push directly against the rear button ribbon cable, to avoid damaging it. | |
| [* icon_caution] Do not push the spudger in too far, to avoid damaging the rear button. | |
| - | [* black] Continue sliding the spudger blade around |
| + | [* black] Continue sliding the spudger blade around the bracket to cut all the adhesive holding the bracket to the rear case. |
| [* black] Remove the bracket. |