跳到步骤＃5
由 Tyler Robbins — 编辑
编辑已通过 由 Tyler Robbins
- 之前
- 之后
- 不变
步骤行
| - | [* black] Using a screwdriver, or another long, thin object (such as a plastic spudger), push against the portion of the drive that was fastened. Be sure to push the drive outward as though it was opening. This completely ejects the device and prepares the laptop for a replacement part. |
|---|---|
| + | [* black] Using a screwdriver, or another long, thin object, push against the portion of the drive that was fastened. Be sure to push the drive outward as though it was opening. This completely ejects the device and prepares the laptop for a replacement part. |
| + | [* icon_note] There are concerns by some about using a metal screwdriver to push the drive open. This is a highly debated topic. The optical drive is extremely resilient (all metal) and the motherboard is not affected when pushing it out. The screwdriver is, therefore suitable. If using a metal tool is concerning, a nylon spudger can be used as a replacement. |