跳到步骤＃1
由 Walter Galan — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Remove the following screws securing the power & volume button cable to the aluminum frame: | |
| - | [* red] |
| - | [* orange] |
| - | [* yellow] |
| + | [* red] Two 5.5mm Phillips #0 |
| + | [* orange] One 2.6 mm Phillips #0 |
| + | [* yellow] Two 2.6 mm Phillips #0 |
| [* black] These screws are angled into the aluminum frame. Be sure to always hold the screwdriver in line with the screw. |