跳到步骤＃1
由 Jade Withrow — 编辑
编辑已通过 由 Jade Withrow
- 之前
- 之后
- 不变
步骤行
| - | [* black] Use the plastic opening tool to lodge its tip into the corner of the device, applying upward pressure on the edge of the panel until the corner is released. |
|---|---|
| + | [* black] Use the plastic opening tool. |
| + | [* black] Lodge the tip into the corner of the device; Applying pressure upward, allowing the panel to be released. |