跳到步骤＃4
由 Kyle VanAllen — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Remove the four screws that hold the device down. | |
| - | [* black] Using the plastic opening tool. Place underneath the circuit board, and lift up slightly. As you lift up, slide the circuitboard in a direction away from the AVI ports |
| + | [* black] Using the plastic opening tool. Place underneath the circuit board, and lift up slightly. As you lift up, slide the circuitboard in a direction away from the AVI ports. |