跳到步骤＃3
由 Carlos Mena — 编辑
- 之前
- 之后
- 不变
步骤行
| [* icon_caution] When pulling the ribbon cables out, make sure not to pull by the wires, as this can damage the wires. | |
| - | [* red] Pinch plastic adapter with two fingers to remove the wire from the circuit board. |
| + | [* red] Pinch the plastic adapter with two fingers to remove the wire from the circuit board. |
| [* orange] Do this for the four circled plugs in the picture. |