跳到步骤＃8
由 Dylan Treschl — 编辑
编辑已通过 由 Dylan Treschl
- 之前
- 之后
- 不变
步骤行
| + | [title] Remove the Top Magnet |
|---|---|
| + | [* black] Remove the three Phillips PH1 screws holding on the top Neodymium magnet. And be careful - they're pretty hard to get off! (I stripped one on accident and had to drill it out!). |
| + | [* black] Now, remove the top magnet. Be careful here! You don't want to put this magnet near any electronic data storage units (i.e. computers or cellphones) as it is very strong. Also, don't get your finger stuck in between it and either the other magnet or it and a piece of metal - it will hurt! These magnets are super strong! |
| + | [* black] Now, remove the two Phillips PH1 screws on the bottom magnet. Your magnet shouldn't have metal shavings on it like mine - this is only because I had to drill out the screw a bit ago. |
| + | [* black] You should now be able to move the read/write head enough to remove the bottom platter. |