跳到步骤＃6
由 Dylan Treschl — 编辑
编辑已通过 由 Dylan Treschl
- 之前
- 之后
- 不变
步骤行
| [title] Remove the Top Platter | |
| [* black] Now, for the fun stuff! Let's remove the top platter first. Remove the six Torx TR6 screws in the middle of the platter and then lift the ring in the center off. Then, slide the top platter out from under the read/write head (Don't worry about being gentle at this point - you've already destroyed all of the data by simply opening the drive up). | |
| - | [* black] Now, pull off the aluminum spacer in between the two platters. We can't remove the second disk just yet, so let's move on for now. |
| + | [* black] Now, pull off the aluminum spacer in between the two platters (see the next step for a picture of this). We can't remove the second disk just yet, so let's move on for now. |