跳到步骤＃2
由 Dylan Treschl — 编辑
编辑已通过 由 Dylan Treschl
- 之前
- 之后
- 不变
步骤行
| - | [title] Remove |
|---|---|
| + | [title] Remove the Drive's Cover |
| [* black] Start by removing the six Phillips PH2 screws holding the top of the drive on. They may be a bit hard to loosen, as they're really old. Don't strip 'em! | |
| [* black] Make sure to peel off the stickers on the drive cover as well. This voids the warranty (who cares at this point?), but is necessary to expose the rest of the screws holding the cover on. Remove these screws also (there should be 2 torx TR7 screws and a 9/32" nut - remove the nut as well - you may need a socket). | |
| [* black] Pull off the drive cover. Pry where a yellow strip of sealing rubber appears. |