跳到步骤＃4
由 Richard Harrison — 编辑
编辑已通过 由 Richard Harrison
- 之前
- 之后
- 不变
步骤行
| - | [* black] Locate and unscrew the two Phillips #1 screws that secure the fan |
|---|---|
| + | [* black] Locate and unscrew the two Phillips #1 screws that secure the fan in place. |
| [* black] Disconnect the fan header from the motherboard of the laptop. | |
| [* icon_caution] The fan header has many small wires sleeved together. To avoid ripping the wires out of the connector, wiggle the connector out of place instead of pulling straight up on it. |