跳到步骤＃1
由 Henry Cates — 编辑
编辑已通过 由 Henry Cates
- 之前
- 之后
- 不变
步骤行
| - | [* black] |
|---|---|
| + | [* black] Desolder the 7 pins for the power switch from the backside of the circuit board. |
| [* icon_note] In order to remove this part you will need a soldering iron that is capable of reaching temperatures greater than 300 degrees Fahrenheit. | |
| - | [* icon_caution] Temperature of USB component will be very hot when desoldered, take precaution when handling. |
| [* icon_note] [guide|750] is iFixit's official guide on how to use a soldering iron. |