跳到步骤＃2
由 Matt Steensma — 编辑
编辑已通过 由 Matt Steensma
- 之前
- 之后
- 不变
步骤行
| - | [* black] Pull the SD card reader |
|---|---|
| - | [* icon_caution] Don't completely pull the SD card out of the device yet |
| + | [* black] Pull the SD card reader from the edge with two holes gently to free the tab at the top of the SD card reader. |
| + | [* icon_caution] Don't completely pull the SD card out of the device yet. There is a ribbon cable connected under the SD card reader. |
| [* black] Reorient the device so that the power jack faces you and lift the SD card reader gently. | |
| [* black] Use a plastic opening tool to pry the SD card ribbon cable off the socket on the motherboard. | |
| [* black] Lift the SD card reader out off of the lower casing. |