跳到步骤＃33
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| - | [* black] Pour a small amount of plastic beads into a heat and stick |
|---|---|
| + | [* black] Pour a small amount of the plastic beads that were included with the kit into a heat- and stick-resistant container. |
| [* black] Use a heat gun to heat the plastic beads until they turn transparent. | |
| - | [* icon_note] Most hair driers are also capable of melting the beads. If neither a hair drier of sufficient power |
| + | [* icon_note] Most hair driers are also capable of melting the beads. If neither a hair drier of sufficient power nor a heat gun are available to you, you can also try boiling them and straining them out of the boiling water. |
| [* black] When using a heat gun or hair dryer, be sure to turn the heat to high but leave the fan on low, or you will blow the beads out of the container! |