跳到步骤＃19
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| [* black] Pre-tin the exposed wires to add rigidity to them and keep them from fraying when pushing through the PCB through-holes. | |
| - | [* icon_note] Pre-tinning is when you cover or fill wires with solder to improve a solder connection. Be sure that your pre-tin does not have any globs on it, or it will not fit through the PCB through-holes. |
| + | [* icon_note] Pre-tinning is when you cover or fill wires with solder to improve a solder connection. Be sure that your pre-tin does not have any globs on it, or it will not fit through the PCB through-holes. If necessary, trim the wire so that it will fit through the holes. |