跳到步骤＃15
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Insert the leads of the 1 µF capacitor through the holes indicated in step 9. Direction of the capacitor does not matter. |
| + | [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 9 or 10. Also do not allow the leads contact the leads of other components. |
| + | [* black] Solder the capacitor to the PCB and clip off the excess leads. |