跳到步骤＃14
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert the leads of the 240 Ω resistor through the holes indicated in step |
|---|---|
| - | [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step |
| + | [* black] Insert the leads of the 240 Ω resistor through the holes indicated in step 7. This resistor will have a red, yellow, brown and gold band on it. The direction of the resistor does not matter. |
| + | [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 7 or 8. Also, do not allow the leads to contact the leads of other components. |
| [* black] Solder the resistor to the PCB and clip the excess leads off. |