跳到步骤＃13
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert the leads of the 240 Ω resistor through the holes indicated in step 9. Direction of the resistor does not matter. |
|---|---|
| + | [* black] Insert the leads of the 240 Ω resistor through the holes indicated in step 9. This resistor will have an orange, grey, brown and gold band on it. Direction of the resistor does not matter. |
| [* icon_note] Be sure to route the leads so that they do not cover any of the indicated holes in step 9 or 10. | |
| [* black] Solder the resistor to the PCB and clip off the excess leads. |