跳到步骤＃12
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| + | [* black] Solder the pins to the board on the printed side of the PCB. |
|---|---|
| + | [* icon_note] Unsure of how to do proper through hole soldering? Check out our [guide|6190|technique guide]. You can even use a thin piece of wire and practice with a hole on an unused trace. |
| + | [* icon_caution] Try to solder quickly and efficiently. Prolonged application of heat to the IC pins can transfer enough heat to damage it. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加