跳到步骤＃10
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| - | [* black] Use a pair of pliers to bend just the tips (approximately 2 mm) of the pins |
|---|---|
| + | [* black] Use a pair of pliers to bend just the tips (approximately 2 mm) of the pins 90° up so that they are pointing the same direction as the IC face. |
| [* icon_note] If you bend too much of the pins, they will not be able to reach their assigned holes. |