跳到步骤＃1
由 Phillip Takahashi — 编辑
- 之前
- 之后
- 不变
步骤行
| - | [* |
|---|---|
| + | [* red] Mark or note the edges that need to be cut to open the AirPort Express case. |
| [* black] Use a dremel tool with a thin cutting bit to slowly cut around the marked edges. Cut evenly and make several shallow passes to ensure that you don't accidentally cut into any of the components inside. | |
| [* icon_caution] If you see sparks while cutting, it means you are cutting through the EMI shields. Reduce your cutting depth immediately to prevent further damage. | |
| [* icon_caution] Be especially cautious when cutting next to the LED light, as the power wires are right next to the case wall. Severing these wires may make the repair extremely difficult. |