跳到步骤＃1
由 Cory Layman — 编辑
- 之前
- 之后
- 不变
步骤行
| + | [* black] Turn the camera with the pop up flash light 90 degrees until you can see the screws. |
|---|---|
| + | [* red] Remove the two screws being cautious not to strip or ruin the screws, with a Phillips screwdriver |
| + | [* black] Be careful not to loose any screws as you will need them to reassemble the camera when finished. |
图片1
没有之前的图片
已添加