跳到步骤＃3
由 Ian Hanken — 编辑
编辑已通过 由 Ian Hanken
- 之前
- 之后
- 不变
步骤行
| + | [* black] Lift the motherboard out of case. |
|---|---|
| + | [* icon_note] You may need to bend the side of the case slightly to give the motherboard room to be lifted out. Don't worry, it can easily be bent back into place. |
| + | [* red] Try to pull the 8-pin connector up as straight as possible. |
| + | [* icon_caution] Be careful with this step. Trying to pull the motherboard out at an angle could break or bend the pins. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加