跳到步骤＃3
由 Luke Williams — 编辑
编辑已通过 由 Luke Williams
- 之前
- 之后
- 不变
步骤行
| + | [title] Backup Battery Disconnection |
|---|---|
| + | [* black] Using a pair of tweezers, remove the ribbon cable connector at the backup battery. |
| + | [* icon_caution] Be sure not to tug on the cables themselves. This could result in damaging the cables. |
| + | [* icon_note] If tweezers are too difficult to use, it is ok to use your fingers, just so long as you don't put a lot of tension on the cables. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加