跳到步骤＃1
由 Evan Noronha — 编辑
编辑已通过 由 Evan Noronha
- 之前
- 之后
- 不变
步骤行
| [* red] Loosen but do not remove the four captive T9 screws securing the heat sink over the CPU. | |
| [* orange] Remove the two 5.4 mm T9 screws securing the heat pipe to the logic board. | |
| + | [* icon_note] Some iMac models have a straight heat pipe rather than a curved one—regardless, the screws will be the same size/type and the ones over the CPU will be captive to the heat sink. |