跳到步骤＃2
由 Evan Noronha — 编辑
编辑已通过 由 Evan Noronha
- 之前
- 之后
- 不变
步骤行
| - | [* red] Remove the two |
|---|---|
| + | [* red] Remove the two 10 mm T10 screws securing the right speaker to the rear enclosure. |
| [* icon_note] These screws have rubber washers behind the speaker that may hold the screw in place after being loosened. You can use a magnet to remove the screws, or simply leave them in place until you remove the speaker. |