跳到步骤＃13
由 Evan Noronha — 编辑
编辑已通过 由 Evan Noronha
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Use tweezers to pull the XXX ribbon cable straight out of its ZIF connector. |
| + | [* icon_caution] There is very little give on this cable, so you may need to apply a decent amount of force. Be sure you are pulling the cable straight back, and not upward against the connector. |