跳到步骤＃4
由 Miroslav Djuric — 编辑
- 之前
- 之后
- 不变
步骤行
| + | [* icon_caution] Be very careful while cutting the black masking tape! Do not damage the cables and circuitry underneath. |
|---|---|
| + | [* black] Use a pen knife to cut the black masking tape. This will reveal the two top screws in the picture. |
| + | [* red] Unscrew the four Phillips screws. |
| + | [* black] Use a spudger to disconnect the black connector. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加