跳到步骤＃3
由 Andrew Optimus Goldheart — 编辑
编辑已通过 由 Andrew Optimus Goldheart
- 之前
- 之后
- 不变
步骤行
| - | [* black] The antenna loop board needs to be pried up (it is glued down). Gently use |
|---|---|
| + | [* black] The antenna loop board needs to be pried up (it is glued down). Gently use a plastic opening tool or spudger, to dislodge the antenna loop board. The board is connected to the antenna electronics by a small ribbon cable. This two-board assembly is very frail. |
| [* black] The two small antenna circuit boards can now be lifted up together, and their orange cable can be peeled from the display. |