跳到步骤＃2
由 Anthony Ciotti — 编辑
编辑已通过 由 Anthony Ciotti
- 之前
- 之后
- 不变
步骤行
| [* black] Slide plastic opening tool in crack at the top corner of the outer frame of the screen (in the gap between the red and black sections of plastic) and pry apart as shown. | |
| [* black] Pry apart all edges the same as the top. Use the metal spudger for the bottom section as it is glued to tape, make sure to pry this apart carefully and the tape should be separated from the black plastic part as shown. | |
| + | [* icon_caution] The glue is difficult to separate. |