跳到步骤＃1
由 Edward Pacheco — 编辑
编辑已通过 由 Edward Pacheco
- 之前
- 之后
- 不变
步骤行
| + | [* black] Using a PH0 sized screw driver, carefully remove the (length) screw from the bottom cover. |
|---|---|
| + | [* red] Using the plastic spudger carefully pry open the bottom cover |
| + | [* orange] Remove the 4 (length) screws holding in the hard drive using (screwdriver type, size) |
| + | [* yellow] Carefully pull on the tab on the hard drive to slide it out from the connector. |
| + | [* green] Lift up and remove the hard drive from the computer. |