跳到步骤＃1
由 Ryan Butler — 编辑
编辑已通过 由 Ryan Butler
- 之前
- 之后
- 不变
步骤行
| - | [* black] Use the black, plastic, Spudger tool, to slowly remove the 2 black peices of tape. |
|---|---|
| - | [* icon_caution] Be careful, as the tape may have wires stuck to it underneath. If you remove the tape to forcefully, some wires may be accidentally ripped out of their place. |
| - | [* icon_note] You can use the Spudger to hold down any wires or chips while using your fingers to peel of the remaining tape. |
| + | [* icon_caution] Be careful when removing the two pieces of tape because there are wires underneath the tape. Lifting too hard may accidentally rip out the wires. |
| + | [* black] While using the black plastic spudger tool, slowly lift the tape with your fingers and hold the wires down with the tool. |