跳到步骤＃4
由 Alan Weihe — 编辑
编辑已通过 由 Alan Weihe
- 之前
- 之后
- 不变
步骤行
| [* black] Gently lift the back cover away from the camera body. | |
| [* black] A gold ribbon cable will join the back cover of the camera to the internal electronic components. Be careful not to remove the back cover without removing the cable since this part can easily break. | |
| [* black] To remove the ribbon cable, gently pull the connector from the camera's internal electronic components using a pair of tweezers. | |
| - | [* icon_caution] Flip the orange bar securing the ribbon cable upwards to allow for safe removal |
| + | [* icon_caution] Flip the orange bar securing the ribbon cable upwards to allow for safe removal. |