跳到步骤＃5
由 Marty Rippens — 编辑
编辑已通过 由 Marty Rippens
- 之前
- 之后
- 不变
步骤行
| - | [title] |
|---|---|
| + | [title] Knot the A, D, and high E strings |
| [* icon_note] Repeat step 4 (outlined below) for ***only*** the strings A, D, and high E . | |
| [* black] Insert the end of the string into the hole in the tuning peg. | |
| [* black] Pull the end over the tuning peg to the right side. | |
| [* black] Bring the end of the string to the left side by passing it under the string, creating a loop. | |
| [* black] Push the end through the loop and then pull both ends until the knot is tight. You may have to press and hold the knot with your finger to tighten completely. |