Guitar String Replacement 步骤 #6 历史记录

-	[* black] ~~Once the string has been securely knotted into place, turn~~ the tuning knob in a *clock-wise motion* to tighten the string until the string makes ~~an audible tone~~ when plucked.
-	[* icon_note] As you tighten the string, make sure to *hold the string tight* with your free hand until the string is tight ~~and in place~~. This will keep the knot from loosening.
-	[* icon_note] Make sure that the string passes over the loose end from the knot *at least once*. This will prevent "slipping" during tuning and will help keep the knot tight.
+	[* black] Turn the tuning knob in a *clock-wise motion* to tighten the string until the string makes a clear sound when plucked.
+	[* icon_note] As you tighten the string, make sure to *hold the string tight* with your free hand until the string stays tight on its own. This will keep the knot from loosening.
+	[* icon_note] Make sure that the string passes over the loose end from the knot *at least once*. This will prevent "slipping" (detuning) during tuning and will help keep the knot tight.

-	[* black] ~~Once the string has been securely knotted into place, turn~~ the tuning knob in a *clock-wise motion* to tighten the string until the string makes ~~an audible tone~~ when plucked.
-	[* icon_note] As you tighten the string, make sure to *hold the string tight* with your free hand until the string is tight ~~and in place~~. This will keep the knot from loosening.
-	[* icon_note] Make sure that the string passes over the loose end from the knot *at least once*. This will prevent "slipping" during tuning and will help keep the knot tight.
+	[* black] Turn the tuning knob in a *clock-wise motion* to tighten the string until the string makes a clear sound when plucked.
+	[* icon_note] As you tighten the string, make sure to *hold the string tight* with your free hand until the string stays tight on its own. This will keep the knot from loosening.
+	[* icon_note] Make sure that the string passes over the loose end from the knot *at least once*. This will prevent "slipping" (detuning) during tuning and will help keep the knot tight.