跳到步骤＃4
由 Michelle — 编辑
编辑已通过 由 Jeff Suovanen
- 之前
- 之后
- 不变
步骤行
| + | [title] Knotting low E, G, and B strings |
|---|---|
| [* icon_note] This knot will be used for ***only*** the low E, G, and B strings. | |
| [* black] Insert the springy end of the string into the hole in the tuning peg. | |
| [* black] Pull the springy end over the tuning peg and to the left side. | |
| [* black] Bring the springy end to the right side by passing it under the string, creating a loop. | |
| - | [* black] Push the springy end through the loop, and then pull both ends until the knot is tight. You may have to press your finger |
| + | [* black] Push the springy end through the loop, and then pull both ends until the knot is tight. You may have to press the knot with your finger tighten it completely. |