Guitar String Replacement 步骤 #4 历史记录

-	[* icon_note] This knot will be used for ~~the (low) E, G and B strings~~ *only*.
-	[* black] Insert the ~~Springy~~ end of the string into the hole in the tuning peg.
-	[* black] Pull the ~~Springy~~ end over the tuning peg and to the left side.
-	[* black] Bring the ~~Springy~~ end to the right side by passing it under the string~~. This creates~~ a ~~Loop~~.
-	[* black] Push the ~~Springy~~ end through the ~~Loop~~ and then pull both ends until the knot is tight. You may have to press your finger down on the knot to get it completely tight.
+	[* icon_note] This knot will be used for *only* the low E, G, and B strings.
+	[* black] Insert the springy end of the string into the hole in the tuning peg.
+	[* black] Pull the springy end over the tuning peg and to the left side.
+	[* black] Bring the springy end to the right side by passing it under the string, creating a loop.
+	[* black] Push the springy end through the loop, and then pull both ends until the knot is tight. You may have to press your finger down on the knot to get it completely tight.