跳到步骤＃4
由 Nicholas Mullins — 编辑
编辑已通过 由 Nicholas Mullins
- 之前
- 之后
- 不变
步骤行
| [* black] Once the "thick" end of the string is knotted securely in the bridge, insert the "springy" end of the string into the hole in the tuning peg. | |
| [* black] Pull the springy end ***over*** the tuning peg to the left side, and then bring it under the string to the right side. This creates a ***Loop***. | |
| [* black] Push the springy end of the string through the Loop and then pull both ends until the knot is tight. You may have to press your finger down on the knot to get it completely tight. | |
| + | [* icon_note] This knot will be used for the (low) E, D, and G strings ***only***. |