跳到步骤＃1
由 Chris Monte — 编辑
编辑已通过 由 Chris Monte
- 之前
- 之后
- 不变
步骤行
| - | [* red] Locate Hard Drive |
|---|---|
| - | [* orange] Remove the 2 mm screws from Hard Drive |
| - | [* yellow] Disconnect wire attached to the system board |
| - | [* green] Remove tape tab from Hard Drive |
| + | [* red] Locate Hard Drive. |
| + | [* orange] Remove the 2 mm screws from Hard Drive. |
| + | [* yellow] Disconnect wire attached to the system board. |
| + | [* green] Remove tape tab from Hard Drive. |