跳到步骤＃10
由 Geronimo Gutierrez IV — 编辑
编辑已通过 由 Geronimo Gutierrez IV
- 之前
- 之后
- 不变
步骤行
| [* black] You will now need to remove the large electrical ribbon located under the screw removed in step seven. | |
| [* black] Gently wiggle the ribbon in an upward motion. | |
| + | [* black] This should be done by adjusting a pair of needle nose tweezers horizontally in order to grasp a greater surface area. This will increase a safer amount of leverage needed to remove ribbon. |