跳到步骤＃8
由 Jesse Johnson — 编辑
编辑已通过 由 Jesse Johnson
- 之前
- 之后
- 不变
步骤行
| - | [* red] Use needle nose tweezers to gently lift the black/grey latch towards the wire |
|---|---|
| + | [* red] Use needle nose tweezers to gently lift the black/grey latch towards the ribbon-wire (the latch rotates upward to release and snaps down to lock). |
| [* icon_caution] Be careful not to break the latch. It cannot be replaced. | |
| [* black] Use tweezers to gently remove ribbon-wires. | |
| [* black] Pull the ribbon-wires towards the back-end of the camera. |