跳到步骤＃8
由 Lauren Newcomer — 编辑
编辑已通过 由 Lauren Newcomer
- 之前
- 之后
- 不变
步骤行
| [* black] Remove the two yellow wire ribbons seen in this photo. | |
| - | [* black] With a pair of needle nose tweezers very gently lift the black/grey latch |
| + | [* black] With a pair of needle nose tweezers, very gently lift the black/grey latch towards the wire ribbon (the plastic latch rotates upward to release and snaps down to lock, be very careful not to break this latch, it cannot be replaced). |
| [* black] After opening black/grey latch proceed to gently remove wire ribbon with needle nose tweezers. | |
| [* black] Pull the wire ribbon towards the back end of the camera. | |
| [* black] Repeat the process with the larger wire ribbon. |