跳到步骤＃1
由 Michael Patch — 编辑
编辑已通过 由 Michael Patch
- 之前
- 之后
- 不变
步骤行
| + | [* black] Locate the four 8.1mm PH0 screws on the corners of the GoPro and set them aside. |
|---|---|
| + | [* black] Gently remove the motherboard by using a plastic opening tool to pry it out of the housing. |
| + | [* icon_caution] Be careful not to damage the ribbon cable connected to the GoPro housing and motherboard. |