跳到步骤＃3
由 Nazmi Bargouthi — 编辑
编辑已通过 由 Nazmi Bargouthi
- 之前
- 之后
- 不变
步骤行
| [* black] With the screws removed, the wires are now able to come off. The wires are connected in two different ways. | |
| - | [* red] The RED arrows indicate a small hinge locking the wire in |
| - | [* orange] The ORANGE markers indicate that you need to lift the wire up and off of the motherboard. Using the |
| + | [* red] The RED arrows indicate a small hinge locking the wire in. To remove the wire, follow the same steps taken to remove the wire in the prior steps. |
| + | [* orange] The ORANGE markers indicate that you need to lift the wire up and off of the motherboard. Using the opening tool, follow the same steps used to remove the swivel screen wire. |
| [* black] For the hinged wires it is recommended that you use tweezers to carefully remove the wire as shown by the RED arrow on the second image. You must carefully remove them by pulling them straight out of the socket they're seated in. | |
| [* icon_caution] It is crucial that you move slowly and carefully! If one of the wires gets damaged, the camera might not work properly after reassembly. |