跳转到主内容

跳到步骤#2

Rebekah Simmons编辑

编辑已通过 由 Rebekah Simmons

之前
之后
不变

步骤行

-[* red] Locate the black plastic volume buttons on each side of the back of the speaker face. The replacement guide will show how to replace the (-) button, but the (+) button will follow the same steps.
-[* orange] For the button you are replacing, a piece of black tape on the side panel may also be covering the yellow connector tip that holds the volume button in place. Remove the black tape if necessary.
+[* red] Locate the black plastic volume buttons on each side of the back of the speaker face.
+[* orange] A piece of black tape on the side panel may also be covering the yellow connector tip that holds the volume button in place. Remove the black tape if necessary.