跳到步骤＃2
由 Shelby Ray — 编辑
编辑已通过 由 Shelby Ray
- 之前
- 之后
- 不变
步骤行
| - | [* red] Locate the black plastic volume buttons on each side of the back of the speaker face. |
|---|---|
| + | [* red] Locate the black plastic volume buttons on each side of the back of the speaker face. The replacement guide will show how to replace the (-) button, but the (+) button will follow the same steps. |
| [* orange] For the button you are replacing, a piece of black tape on the side panel may also be covering the yellow connector tip that holds the volume button in place. Remove the black tape if necessary. |