跳到步骤＃1
由 Amber Kriech — 编辑
编辑已通过 由 Amber Kriech
- 之前
- 之后
- 不变
步骤行
| [* icon_caution] Do not grab the body of the flute by its keys when removing it from the case. | |
| [* black] Instead, grasp it by the tenon section, where you won't put stress on the springs. | |
| [* black] Remove the head piece in a similar fashion. | |
| [* icon_caution] Avoid contact with the nickel-silver portion of the tenon when holding the head piece. The sweat from your skin leaves behind acids that can eventually corrode it. | |
| [* icon_caution] Also, don't grab the head piece by its lip plate. If you are wearing a ring, you could scratch the embouchure hole. | |
| - | [* icon_note] It is |
| + | [* icon_note] It is okay to grab the foot joint by the bottom two keys (the ones connected to the B and C rollers). |