Repairing Flute Felt Key Pads 步骤 #1 历史记录

-	[* ~~black~~] ~~When removing the flute from its case, be sure~~ not to grab the body by the keys.
+	[* icon_caution] Do not grab the body of the flute by its keys when removing it from the case.
	[* black] Instead, grasp it by the tenon section, where you won't put stress on the springs.
	[* black] Remove the head piece in a similar fashion.
-	[* ~~red~~] ~~When holding the head piece try to avoid~~ contact with the nickel-silver portion of the tenon as the sweat from your skin leaves behind acids that can eventually corrode it.
-	[* ~~orange~~] Also, don't grab the head piece by its lip plate. If you are wearing a ring, you could scratch the embouchure hole.
+	[* icon_caution] Avoid contact with the nickel-silver portion of the tenon when holding the head piece. The sweat from your skin leaves behind acids that can eventually corrode it.
+	[* icon_caution] Also, don't grab the head piece by its lip plate. If you are wearing a ring, you could scratch the embouchure hole.
	[* icon_note] It is ok to grab the foot joint by the bottom two keys (the ones connected to the B and C rollers).